Even if you aren’t a professional and don’t have clients you do work for, you can still benefit from the right tools in your workshop. Many people think that they need a planer (read our review) and a separate jointer (read our review), but buying a combo tool lets you take care of all your projects with a single machine.
Looking at some jointer planer combo reviews can help you figure out which one is best for your needs based on what others thought.
NOTE: If you are unsure of the differences between planers and jointers, read our article explaining them here.
We looked at those reviews as well as price, motor, and other factors to make a list of the top models. The best of the best is the Jet JJP-12HH, which is a 12-inch combo tool.
This model has a helical cutter head that helps it operate more quietly and to give you the smooth and even cuts that you need.
Best Picks on the Market
The primary difference between jointer and planer tools is that a jointer shores up the edges on a piece of wood while a planer removes a portion of the thickness from that wood. Using a combo tool helps you create boards and sheets that are perfectly smooth as well as even and level.
The Jet model is our top choice for some reasons, including its helical cutter head, three-horsepower motor and fencing. That fencing lets you make any adjustment to your cutting surface without removing the fencing first.
This is also one of the more extensive jointer/planer combo tools that you’ll find because it has a 12-inch size and most others have an eight-inch or 10-inch size. This gives you a larger work area. You’ll find a crank for moving the wood across the tool and an emergency stop button too.
Top Picks on the Market Today
1. Jet JJP-12HH
Finding the top power jointer and thickness planer starts with a look at this Jet model, which comes with its own durable cabinet base made from cast iron that absorbs vibrations and any shaking caused by the three-horsepower motor inside.
That motor works so quickly that you cut down and smooth out boards in a fraction of the time that it would usually take. It has a helical cutter head inside too that helps it run more smoothly and with less noise.
As it has a 12-inch design, this model can work with larger pieces of wood and create the smooth finish that you want with less work.
The base has a vent that helps keep your work area clean as it blows away dust and debris, but you’ll also find two buttons on the front of the cabinet. One is bright green and serves as the power button, and the other is a dark red and acts like an emergency stop.
Jet also added a crank wheel to the side of the cabinet. This wheel turns to help you adjust the speed at which the woods moves across the cutter head.
2. RIKON Power Tools 25-210H
As you look for a durable jointer planer combo for sale, you might want to consider this model from RIKON Power Tools, which has the same 12-inch design and the same helical cutter head as the Jet model but costs a little less.
It comes with a three-horsepower motor that needs the only 220V to run, and this engine can make up to 3,400 revolutions every minute.
The cutter head inside actually has four separate heads that remove wood down to the exact depth that you need without leaving behind fragments or broken pieces.
With a feed rate of 23 feet per minute, this RIKON model can operate faster than almost any other model on the market, and it comes with extension tables on each end that supports the wood before and after it moves across the cutter head.
Fencing at the top supports the wood when making other types of cuts and remains attached to the machine for convenient use. It also has a crank wheel for changing the feed rate and speed as well as an emergency stop.
3. Jet JJP-12
Similar to our number one choice, this Jet model has a 12-inch design and fencing on top that keeps the wood moving smoothly across the cutter head, which has a helical configuration that lets it operate faster and more efficiently.
This cutter head features three knives made from stainless steel that remain sharp, even after going thousands of small cuts, and this head sits close to the top of the cabinet to cut down on accidents.
A green power button turns the machine on, but a red handle around this pin lifts up to bring the three-horsepower motor to a complete stop in an emergency.
The fencing on this tool, which sits on the very top, responds quickly to your adjustments and uses a particular type of extruded aluminum that offers more support for more massive and larger pieces of wood. You can keep that fencing on the machine when using it as a planer or a jointer and when switching between those options.
Jet provides you with an exhaust system to take care of any sawdust coming off the wood and a hand wheel for changing the feed rate.
4. Grizzly GO675
One of the only products we found that is made in the United States is this one from Grizzly, which appeals to those who want to support the national economy.
It has a standard design that features an exhaust system that sticks out from one end to keep the area around the base cleaner and a cranking handwheel for adjusting the feed rate.
This hand wheel is unique because it has a larger handle that sticks out from the side to help you grab and twist it, though you may find that the handle occasionally gets in your way.
Headrails actually slide around to give you more clearance and to help you adjust the gab plates as needed, and it has a large piece of metal fencing at the top that will keep your wood boards from falling over the side when using it as a jointer or a planer.
This model weighs nearly 400 pounds, which includes the weight of the substantial base that supports the tool.
5. RIKON Power Tools 25-010
We also like this model from RIKON Power Tools because it’s more lightweight than some of the other models, which makes it an excellent choice for those who work away from home and on different job sites.
Made from aluminum, the table on the bottom acts as a base and has ribbed areas that keep the aluminum pieces from splitting or coming apart, and the ribbing continues down along the legs too, which has small metal feet that add to its stability.
It also has a J-belt as part of the belt system that keeps a steady flow of power moving to the cutter head without the machine vibrating.
A four-inch dust port near the bottom of the tool does an excellent job of keeping your area cleaner and moving away dust that can save you from seeing clearly. It has a 1.5-horsepower motor with an induction design and has a capacity for boards of six-inches to 10-inches in size. You can adjust both the planer and jointer to make maximum cuts of up to 1/8 of an inch also.
6. Jet JJP-10BTOS
The last jointer planer combination machine to make our list is this model from Jet, which weighs less and is easier to use than some of the other models on our list and is one of the top portable jointer planer options.
It costs significantly less than other options from Jet but comes with some of the same features like a cutter head inside that produces a smooth finish without any ragged edges or splinters.
It even has a hand crank on the top for adjusting the flow rate of your wood as it moves across that head.
This one comes with a smaller base that can limit the type and size of boards you use with it because that base cannot support heavier or larger pieces, but that lightweight station makes it easy to move the tool when needed.
It can cut boards up to a maximum width of 10 inches and has a maximum planer cutting depth of .08 inches as well as a maximum jointer cutting depth of 1/8 of an inch. This combo comes with can make up to 18,000 cuts in a single minute and comes with a switch that functions as the start and stops.
Before buying a combination jointer planer, you should decide if you need both tools. You may find that most of the work that you do requires either a planer or a jointer but not both.
While the Jet JJP-12HH gets out nod as the top model on the market, you’ll find other combos that might be better for your workshop, including those from Grizzly and RIKON Power Tools.