Last Updated on
A good table saw should include features such as a solid work table that won't shake and a large rip capacity. It's important that you compare those features and others as you shop for a saw priced at under $500. You will find good features on all five of the top table saws we found in this price range.
Our choice for the best table saw under 500 is the DEWALT DWE7480XA, which comes with a 10-inch saw blade. The carbide tips on that blade do an effective job of cutting through any type of wood and allow you to make rip cuts too. To make sure this is the best saw for you, compare it to all the others in the $500 range.
Top Table Saws Under $500 Comparison Chart 
The 5 Best Table Saws Under $500 – Reviews
1. DEWALT DWE7480XA Portable Table Saw
The best table saw under $500 that we found is the DWE7480XA, which comes from DEWALT and includes a long warranty. As a portable and job site table, this model comes in handy when you want to work outside or need to do work on the job. Not only can you carry the saw to and around the site, but you can also use it with or without the included stand.
Some of the top features of this affordable DEWALT saw include a 2.5-inch dust port that works with vacuum systems and telescoping fence rails. Those rails do a good job of keeping the wood moving smoothly through the blade and help you make quick adjustments. The saw also has a 15 amp motor with a total output of 4,800 revolutions per minute.
Though this table does have a short infeed table and can kickback more than you would expect, it's a solid choice for those who want to spend less than $500. It comes with a guarding system that makes sure your hands are a safe distance from the blade and a stand that you can fold flat when not in use. The 10-inch blade that works with the saw has 24 carbide tips and adjusts to make beveled cuts of up to 45-degrees.
2. Hitachi C10RJ Jobsite Table Saw
One of the more convenient and easy to use table saws in the $500 range is this Hitachi model, which comes with a roll and fold cart. When you need to get to work, you can use that cart to roll the saw around, but it also transforms into a handy stand for using the saw in the field. This stand helps the saw stand higher off the ground and eliminates the need for a separate cabinet or stand.
With an RPM output of 4,500 and a 15 amp motor, this Hitachi saw isn't quite as powerful as our number one pick but is still a solid choice. It has an electric brake that you can hit during an emergency to stop the blade and a power button that you need to pull out and press down to prevent accidental starts. This model also comes with a 10-inch blade that has an impressive 40 carbide tips.
The work surface on this table measures more than 28 inches by 22 inches and works with the extension rails to enlarge that area to two-feet by 22 inches. You can use this saw to make beveled cuts of up to 45-degrees on boards that are more than two-inches thick and can make 0-degree cuts on wider boards. It also has telescoping pieces for making rip cuts.
3. SKILSAW SPT70WT-01 Portable Worm Drive Table Saw
Though this SKILSAW model lacks any type of cart or stand, it works so well that you might overlook that issue and use it on a cabinet in your garage or workshop. It has a 25-inch rip capacity and can cut to a total depth of 3.5 inches in most boards. The 10-inch blade can work on hardwoods thanks to the worm drive gear inside the saw.
All the features found on more expensive saws are on this one, including a flywheel on the front that you can turn to make cuts and a start button that keeps the saw from coming on accidentally. The case and other parts of the saw use aluminum, which keeps the weight of the whole piece at under 50 pounds. That aluminum can make the blade wobble quite a bit and cause the saw to run loudly.
There were also some issues reported with the fence rails, namely with getting those rails to align to the table, though SKILSAW claims that the self-aligning rails are easy to use. It does have some good features though that includes a guard system that keeps the blade away from your hands and a 15 amp motor with a no-load speed of 5,300 RPM.
4. DEWALT DW745 Table Saw
DEWALT makes its second appearance on our list of the top saws under $500 with the DW745, which is a portable model designed for use in the field and on the site. To ensure that the saw can handle the rough and tumble areas where you work, the manufacturer included a steel roll cage that protects it in all types of accidents. As it weighs just 49 pounds, you can easily move the saw too.
Most of the issues reported with this model are expected, including the fence rails that can fall out of alignment and the way the saw can shake and shimmy while you cut. You may need to keep one hand firmly on the saw to make sure it stays in place and keep an eye on your measurements too. The fence system can move, though this system has a high rip capacity.
The DW745 is the only saw we found that you can use with wood that is slightly damp or frozen. It has a 15 amp motor that keeps the blade spinning and reduces kickback when it comes into contact with knots and other hard spots too.
5. Bosch GTS1031 Portable Jobsite Table Saw
If you need a $500 and under table saw that you can use anywhere, consider this Bosch model, which weighs only 50 pounds and has a built-in handle that you can use to carry it. When you store it, you can tip the saw over on its side to reduce the footprint too. This is a good choice for most workshops because it has a dust port that is compatible with most vacuum systems too.
The riving knife is a feature that many users like because it lets you make different cuts and even stop before you cut all the way through a board. Bosch gave this model a no-load start that lets it reach a full 5,000 RPM output without worrying that you might pop a fuse or blow a circuit. It also comes with a durable blade with 24 carbide teeth.
Another convenient and handy feature of the GTS1031 is the onboard storage, which lets you take all the tools and supplies you need to the site. Though it does not have a storage area for the dado nut, that nut lets you make unique cuts as needed. Bosch also gives you an 18-inch rip capacity and anti-kickback protection with this saw.
Final Verdict: Our Top Choice
DEWALT DWE7480XA Portable Table Saw
After carefully considering all the features found on the top table saws, we really had to give the top spot to the DEWALT DWE7480XA. With a 2.5-inch dust port and a 24-inch rip capacity, it can tackle most jobs and keep your work area and the surface clean. It also has a 15 amp motor and easy to use controls.
Thanks to the included miter system, this table lets you more easily set up the measurements you want to use and use them with multiple boards. If you want to get a great table saw and don't want to spend more than $500, make the DEWALT DWE7480XA the one you choose.